Gear Boxes:
The fine worm gearboxes have cast iron gear case of streamlined design
completely air tight, dust proof and capable of being installed in open
without any cover. The worm shaft is made of alloy steel, duly hardened
and tempered. The worm wheel is made of chill cast phosphorous bronze
and teeth accurately generated on gear hobbing machines. They are
supported on extra heavy duty taper roller anti friction bearings of
ample margin of safety to allow adequate journals as well as thrust
loads. Lubrication is effected by splash of oil from the sump. Thus, no
special care is required except for occasional oil topping to the
required level. Air cooling is effected by means of standard
polypropylene or metal fans. They are ranges from:
- Models: C.D. 50, 60, 75, 85, 100 mm
- Ratio: 30:1 or 40:1
- Center Distances: 40 mm to 400 mm
- Adaptable Worm Gear Boxes: from CD 25mm to 85mm
- Suitable in single or double stage reductions.
- Also made as per customer's specifications, drawing, requirements.
- Overhauling of Old Gear Boxes also undertaken.
|
